Support plate Pancake 2
ClimaLine's support plate gives the Pancake 2 tray support where the distances between the mountings on the outdoor unit of the heat pump are too large for the tray to reach the left edge of the outdoor unit.
- For Pancake 2, only if the distance between the outdoor unit's mountings is longer than 650mm.
The support plates are mounted on the left side of the outdoor unit's mountings, under the vibration dampers.
Technical information
- Color: White
- Material: galvanized steel
- Length: 300mm
- Width: 150mm
- Steel thickness: 1.5mm
- Manufactured in Europe.
A Climaco design
When used with Pancake 1
Heat pump outdoor unit with the following properties:
- Width: at least 800mm
- Distance between mountings: longer than 560mm
When used with Pancake 2
Heat pump outdoor unit with the following properties:
- Width: at least 940mm
- Distance between mountings: longer than 600mm
Included are:
- Support plate
- M8 bolts, washers and nuts.
- Installation instructions
