Support plate Pancake trays
ClimaLine’s support plate gives some Pancake trays support when the distance between the mountings on the outdoor unit of the heat pump are too large for the tray to reach the left edge of the outdoor unit.
- For Pancake 1, only if the distance between the outdoor units mountings is longer than 560mm.
- For Pancake 1, only if the distance between the outdoor units mountings is longer than 560mm.
The support plates are mounted on the left side of the outdoor unit’s mountings, under the vibration dampers. It gives the Pancake trays support, so the tray can reach all of the water outlets of the outdoor unit.
Technical information
- Color: White
- Material: galvanized steel
- Length: 420mm
- Width: 150mm
- Steel thickness: 1.5mm
- Article number: 360-198
- Manufactured in Europa.
A Climaco design
When used with Pancake 1
Heat pump outdoor unit with the following properties:
- Width: at least 800mm
- Distance between mountings: longer than 560mm
When used with Pancake 2
Heat pump outdoor unit with the following properties:
- Width: at least 940mm
- Distance between mountings: longer than 600mm
Included:
- Support plate
- Installation instructions
